Table of Contents
Advertisement
B. In the calendar box (upper part of the
with green background indicates there are some recordings have been saved.
C. In the camera-time-schedule list (lower part of the
segment which is marked with blue background indicates the corresponding
camera has recording files at the time segment. There is a vertical blue line which
indicates the base time of the playback.
D. Users are able to move the blue base time line to any time, and then click the
Search button, the
the playback is changed correspondingly.
E. Press the
icon (Figure 6-2,
(2)
Event Search
A. Firstly, select a camera which is to be searched on the main console of playback.
B. Click on the Event Search button, Search by Event dialog box will be pop-up
(Figure 6-4).
C. After specifying the condition (date, time, event type, etc.), click the Search button,
it will list the event log about the camera.
D. For the event log, there are four types：
Motion：Be trigged by motions detected.
Sensor：Be trigged by sensors active.
Video Signal：Be trigged by videos missed or recovered.
Manual Record：Be trigged by users' Manual Recording.
Search by
Search by Time
dialog box will be closed and the base time of
) will start playback of the video.
Figure 6-4
86
Time), the date which is marked
Search by
Time), the time
Advertisement
Table of Contents
