Table of Contents
Advertisement
(4)
Auto Login (Figure 5-2,
If this configuration is enabled, the SmartVIEW system will be login with the selected
account after each starting of the operation system. The installation will automatically
create a default account (with an "Administrative" permission) whose user name is
"Admin" and the password is "1234", users will need to login with an authorized
account and password at each system starting, if this configuration has not been
checked.
(5)
Enable Remote Reboot (Figure 5-2,
If this configuration is enabled, any HTTP connection with the input password will
trigger system to reboot. Ex.：
A. http：// SmartVIEW IP address {：Port Number} / Reboot.cgi
B. Input the correct password.
C. The operation system will be rebooted.
(6)
Reboot (Figure 5-2,
reboot on a weekly day and time. If this configuration is enabled, please do not set any
password for the default login account unless you do not want the SmartVIEW system
be automatically logged in after the SmartVIEW system rebooting.
：
Notice
Any changes in this Configurations Page won't be saved until the
been clicked.
)
)
)： Users can configure the SmartVIEW system to automatically
Figure 5-2
50
button has
OK
Advertisement
Table of Contents
