Table of Contents
Advertisement
(1)
Description： A name or a description of the Action.
(2)
Event Type： The type of the trigged event (Table 5-1). For
and
Camera
Signal, the items
Event Type
Record
Motion
Sensor
Video Signal
(3)
Device Name：A name of the device that the event belongs to.
(4)
Device Description：A name of the device that the event belongs to.
：
Notice
Please refer to Section 5.100 Sensor Settings.
(5)
Action Interval：If the same event occurred within a period of event interval more than
one time, all of the events will be treated as a single event. This default value is 10
seconds and the value can be set between 0 ～ 3600 seconds.
(6)
Action Setup：Click on the
Setting
(Figure 5-39
A. DO：Digital Output, to trigger external digital devices attached on IP camera. For
example, siren and alarm light, speaker, etc.
：
Notice
Refer to Section 0 DO (Digital Output) Settings.
B. PTZ：To drive the specific speed dome camera to aim a specific position for a
specific time.
：
Notice
Refer to Sections 4.7 Speed Dome Camera Control and Section 5.11 Event
Action Settings (PTZ related information)
C. E-Mail：To send an email to relevant person.
D. SMS：To send a SMS text message to relevant person.
：
Notice
Refer to Section 0 SMS / Email / FTP Settings.
E. HTTP Call：To perform a CGI calling to a specific HTTP web site.
F. Video Clip：To start saving a video clip of a specific camera.
G. Snap Shot：To snapshot a picture and save it to a specific folder.
Device Name
and
Device Description
Recording space full
Recording storage regain space
Motion
Sensor
Video loss
Video Detected
Table 5-1
Action Setup
button to open a dialog box titled
). Users can set an action definition by selecting actions.
82
Motion
Detection, Sensor,
are required.
Status
Action Item
Advertisement
Table of Contents
