Black Box 4-Port ServSwitch KV7003A User Manual page 18

Command
<Left-Ctrl><Left-Ctrl> X
<Left-Ctrl><Left-Ctrl> <up arrow>
<Left-Ctrl><Left-Ctrl> <down arrow>
<Left-Ctrl><Left-Ctrl> 0
Any key
<Left-Ctrl><Left-Ctrl> S
X = 1, 2, 3, 4
After switching ports, there is a delay of up to 2 seconds before the
video displays. This is normal and is due to the video signal's refresh
rate.
A S
UTO CAN
The AutoScan feature allows you to monitor the activity of the connected
computers at regular ten-second intervals so that you can monitor the computer
activity without having to press the front-panel pushbuttons. This time interval
cannot be changed.
To invoke AutoScan, press <Left-Ctrl><Left-Ctrl> 0.
The interval between these two keys should be no more than a half
second. Once the scanning begins, it continues until you press any key
to exit AutoScan.
A flashing port LED indicates that the connected computer is running
AutoScan.
Table 4-1. Hotkey commands.
NOTE
NOTE
NOTES
CHAPTER 4: Operation
Description
Switch to PC "X".
Switch to previous active PC.
Switch to next active PC.
Begin AutoScan.
Stop AutoScan.
Enable/disable "beep" sound.
15