The Main Screen; Displaying A Single Channel - Konig SEC-DVR504 Full Manual

the video preview interface. The HDD must be formatted in the DVR before use.
To format the HDD, first, from the main menu, select "System settings." Click "SYSTEM,"
then select "HDD management," and lastly, select "format." If the HDD is already installed, the
default setting is for the DVR to start recording and a red dot icon ( ) on the screen will
indicate that it is functioning normally.

4.1 The Main Screen

The standard layout is four windows evenly distributed over the screen. From the main screen,
you can access menu options and switch among channel views, displaying either all channel
feeds simultaneously or displaying a full-screen view of a single selected channel.

4.1.1 Displaying a Single Channel

In the multiple-screen view, you can make a particular window active by left-clicking on it
once with a mouse, or navigating to it using directional buttons ( , , , ).
To display a full-screen view of a single channel, press the corresponding numerical or
positional buttons ( ) on the front panel; alternatively, you can do so by left
double-clicking on the desired window.
In order to return to the multi-screen view, either double-click on the screen again or press the
single-/multiple-view button either on the remote control or the front panel of the DVR.
You can choose to display the status bar and or toolbar, or to hide them by right-clicking on the
screen. These three options alternate in sequence.
14