Honeywell LYNX Touch User Manual page 51

Ready To Arm
1
4
Enter Time
10:21 AM
7
AM / PM
Clear
Editing a Scheduled Function
Ready To Arm
Auto Arm -Auto Stay
Edit
Add New
Deleting a Scheduled Function
Ready To Arm
Auto Arm -Auto Stay
Edit Add New
10. If Auto Stay is selected, select "Clear" then
2 3
6
5
11. Select a Device (Device 1 through Device
9
8
12. Enter a Start Time and End Time on the
0 Done
5000-100-147-V0
1. At
-Daily
2. Select the "Edit" button. The Schedule
Delete
5000-100-179-V0
1. At
-Daily
2. Select the "Delete" button. A confirmation
3. Select the "" button. The system returns
Delete
5000-100-179-V0
– 51 –
USER FUNCTIONS
Scheduling User Interface
enter a 4-digit time on the displayed keypad
then select "Save". If "Output" is selected
proceed to Step 11. If "Disarm Notification"
is selected proceed to Step 12.
16).
displayed keypad then select "Save".
the Schedules screen,
Schedule you wish to edit.
programming screen will appear. Follow the
steps as noted above in the programming a
Scheduled Function section to edit and
save your changes.
the Schedules screen,
Schedule you wish to delete.
screen will be displayed. Select "Yes" to
confirm the deletion.
to the Master User programming screen.
select the
select the