System Functions; Testing The System; Test Mode - Honeywell LYNX Touch User Manual

Test Mode

The Test mode allows each protection point to be checked for proper operation. When the
Walk Test mode is active, the control sounds a single beep every 30 seconds as a reminder
that the system is in the Test mode.
NOTE: An alarm message will not be sent to your alarm monitoring company during these tests.
Entering Test Mode
Disarm the system and close all protected windows, doors, etc. The "READY" indicator
should be lit.

Testing the System

Ready To Arm
Arm Away Arm Stay
10:18 AM June 8, 2010
Ready To Arm
Program the system
Enter Code:
Cancel
Ready To Arm
Users Devices
Date Time Events
Testing the System (to be conducted weekly)
Tools
Settings
Back
5000-400-056-V0
1 2 3
4 6
5
7 9
8
Clear 0
5000-100-009-V0
Schedules Test
Reminders Slide Show
Back
5000-100-070-V0

SYSTEM FUNCTIONS

1. With the system in the disarmed state,
select the "Tools" icon from the second page
of the Home Screen. The system displays
the Keypad screen.
2. Enter your 4-digit Master User Code. The
system displays
programming screen.
3. Select the "Test" icon. The system displays
the Test screen.
– 59 –
the Master User