Honeywell LYNX Touch User Manual page 30

SECURING THE PREMISES
Panic Keys
Activating a panic alarm
Ready To Arm
Arm Away Arm Stay
10:18 AM June 8, 2010
Ready To Arm
Police Fire
Fire Alarm
Fire Alarm
Fire
Enter Code:
Cancel
Zones System
Message
More
5000-400-055-V1
Medical
5000-100-068-V0
1 2 3
4 5 6
7 8 9
Clear 0
5000-100-149-V0
– 30 –
1. With the system in the disarmed or armed
state, depress and hold the "Panic" key until
the system displays the Panic screen
(approximately 3-4 seconds).
2. Touch the desired panic icon on the screen.
3. If applicable, the alarm will sound and the
associated icon will be displayed.
Note: Dependant upon how your system has
been programmed a keypad may be
displayed. This will allow you to cancel
the alarm by entering valid User Code
on the keypad.