Panasonic Workio DP-190 Operating Instructions Manual page 45

To install your machine as a POP3 Client, the following network parameters need to be programmed on your network.
• TCP/IP Address of your machine
• TCP/IP Subnet Mask of your machine
• TCP/IP Address of the Default Gateway
• TCP/IP Address of the DNS Server (if not available, see Note 2)
• Email Address of your machine (see Note 3)
• Name or IP Address of the Default SMTP Mail Server
• POP Server Name or IP Address
• POP User Account Name
• POP Password
Email Transmission (from your machine to a PC)
ifaxuser@fax01.panasonic.com
Email Reception (from a PC to your machine)
ifaxuser@fax01.panasonic.com
3. The email address format can be the same as your regular email address. If your email
NOTE
address is popuser001@panasonic.com, your machine's email address can be
Internet_Fax@panasonic.com.
Gateway (Router)
SMTP
POP3
popuser001@panasonic.com
Gateway (Router)
SMTP
POP3
popuser001@panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
45