advanced scale models Sukhoi SU-26M Assembly Instructions Manual page 3

kiT conTEnTS
Before you begin assembly, group the parts as we list them below. This will ensure that you have all of the parts before you begin assembly
and it will also help you become familiar with each part.
If you find any parts missing or damaged, please contact your local distributor directly,
using the customer Service information on the previous page.
AiRFRAmE ASSEmBLiES
q (1) Fuselage with Removable Canopy
q (1) Right Wing Panel with Aileron
q (1) Left Wing Panel with Aileron
q (1) Horizontal Stabiliser with Elevator Halves
q (1) Rudder
mAin LAndinG GEAR And TAiL WhEEL ASSEmBLiES
q (1) Preformed Main Landing Gear
q (1) Tail Wheel Bracket with Tail Wheel
q (2) Main Gear Wheels
q (2) Threaded Axles with Hex Nuts
q (2) Wheel Collars with Grub screws
q (3) M4 x 16mm Socket-Cap Screws
q (3) M4 Flat Washers
q (3) M3 x 8mm Wood Screws
q (1) Steel Steering Pin
ELEVAToR conTRoL SYSTEm ASSEmBLiES
q (2) 110mm (4-3/8") Threaded Pushrods
q (2) Nylon Control Horns with Backplates
q (4) Clevises
q (4) M2 x 25mm Machine Screws
q (4) M3 Hex Nuts
q (6) Nylon Hinge Points
RuddER conTRoL SYSTEm ASSEmBLY
q (1) Stranded Pull-Pull Cable
q (1) M3 x 55mm Threaded Rod
q (2) Nylon Adjustable Control Horns
q (4) Clevises
q (4) Threaded Couplers
q (2) M3 Hex Nuts
q (2) M3 Flat Washers
q (4) M2 Hex Nuts
q (4) Brass Crimp Collets
q (3) Nylon Hinge Points
ThRoTTLE conTRoL SYSTEm ASSEmBLY
q (1) 725mm (28-1/2") Threaded Pushrod
q (1) 675mm (26-1/2") Pushrod Guide Tube
q (1) Clevis
q (1) Adjustable Pushrod Connector with Hex Nut and Grub Screw
Page 3