OpenEye OE-ENVRPOE4 User Manual page 33

SENSOR
Orange
CONT+MOT
Sky Blue
CONT+SENS
Brown
MOT+SENS
Lilac
34
Sensor-activated recording.
In sensor mode, the unit will record when a sensor is
triggered - during DURATION time as set in RECORD >
MOTION /EVENT CONFGURATION > ACTION.
Continuous and motion detection recording
The unit records in CONTINUOUS mode but switches to
MOTION when motion is detected in the motion area. The
recorder also will log a Motion Event and send the event to
the Remote Monitoring software.
If you set motion to OFF in RECORD > MOTION /EVENT
CONFGURATION and set CONT + MOT in SETUP >
RECORD > SCHEDULE the recorder will NOT record
when motion is detected.
Continuous and sensor-activated recording
In this mode, the unit records continuously and switches to
SENSOR recording mode when a sensor is triggered. The
recorder also will log a Sensor Event and send the event
to the Remote Monitoring software.
Motion detection and sensor-activated recording.
The recorder will only record when motion is detected or a
sensor is triggered.