Ptz Settings; Preview Menu; Playback By Search - HIKVISION DS-7200-ST Series Quick Operation Manual

Hide thumbs Also See for DS-7200-ST Series:
Table of Contents

Advertisement

DS-7200HVI-ST Series DVR Quick Operation Guide

PTZ Settings

To configure PTZ settings:
1. Click Menu > Settings > PTZ to enter the PTZ Settings menu.
2. Select channel where PTZ camera is installed next to Camera label.
3. Configure the settings of baud rate, date bit, stop bit, parity, flow
control, PTZ protocol and address.
4. Click OK to save settings and exit the PTZ Settings menu.
PTZ Control
The PTZ control panel in the live preview window provides a series of PTZ control buttons, as shown in the
following figure:
1. Directional Pad/Auto-scan Buttons: Controls the movements and directions of the PTZ. The center button is
also used to start auto-scan of PTZ.
2. Zoom: Used to zoom in and out with the PTZ.
3. Focus: Used to adjust the focus of the PTZ.
4. Iris: Used to open up or close the iris of the PTZ.
5. Speed: Adjusts the movement speed of the PTZ.
6. Light: Turns PTZ light (if applicable) on and off.
7. Wiper: Turns PTZ wiper (if applicable) on and off.
8. Zoom In: Instantly zooms PTZ in.
9. Center: Centers PTZ. Camera: Select a PTZ camera.

Preview Menu

Call Preset: Call a PTZ preset.
Call Patrol: Call a PTZ patrol.
Call Pattern: Call a PTZ pattern.
Preset Settings: Enter PTZ preset configuration menu.
Patrol Settings: Enter PTZ patrol configuration menu.
Pattern Settings: Enter PTZ pattern configuration menu.
PTZ Menu: Enter PTZ menu.
PTZ Settings: Enter PTZ settings menu.
Playback

Playback by Search

To playback files from a general search:
1. Enter into the Video Search menu by clicking Menu > Video Search.
2. Select General tab, and Set the search parameters by selecting cameras to search, video/file type and the
start/end time.
3. Click the Play button to start playback of all the files found with the specified search criteria or click the Search
button to bring up the list of search results. After search results are presented, select the file you would like to
playback and press Play to enter synchronous playback cameras selection.
28

Advertisement

Table of Contents
loading

Table of Contents