Automatic Buttonhol - Janome S-3023 Instruction Manual

Janome S-3023 Instruction Manual
Automatic Buttonhole
Machine Setting
www.aaasewing.com
*
Remove the finger guard before
attaching the automatic buttonhole
foot (R) (refer to page 12).
* The size of buttonhole is
automatically set by placing the
button in the automatic
buttonhole foot (R).
* The button holder of the foot
takes a button size up to 2.5 cm
(1˝) in diameter.
* Make a test buttonhole on a
sample duplicating the fabric,
interfacing and seams of the
actual garment.
* Place the button on the fabric
sample and mark the top and
bottom to determine the position
of buttonhole.
* Use the interfacing on the stretch
fabrics.
q w e
q
Turn the handwheel toward you to raise the needle to its highest
position.
Raise the presser foot lifter.
w
Set the pattern indicator at "BH" by turning the pattern selector
dial.
e
Attach the automatic buttonhole foot (R).
NOTE: There should be no gap between the slider and spring holder
of the foot as shown above.
Janome sewing machine
(NOTE)
There should
be no gap
Slider
S-3023 Owners Manual/ User Guide
Spring
holder
29