Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Entel HX446E
Summary of Contents for Entel HX446E
- Page 1 User Guide – HX446E v08/08 Professional compact handheld transceiver Common Information HX446E...
-
Page 2: Table Of Contents
Introduction This guide covers the ‘basics’ of your radio’s operation.To meet your exact require- ments the radio may have been customised by your Entel authorised dealer.These features will be explained in a separate guide issued by the dealer. Table of Contents... -
Page 3: Certification
Certification CE Compliance Statement The HX446E transceiver displays "CE" on the serial number label, indicating its compliance with the essential requirements of the EEC directive for Electromagnetic Declaration of Conformity Compatibility. We Entel UK Limited 4 Elstree Gate, Elstree Way... -
Page 4: Radio Care
Battery care Introduction Battery Pack Precautions • Your Entel radio is supplied with a high Switch the transceiver OFF before charging performance Lithium Ion (Li-Ion) battery. • Charge the battery pack before use These batteries: •... -
Page 5: Battery Care
• Do not reverse-charge or reverse-connect the battery Note: only genuine Entel batteries should be used. • Do not touch a ruptured or leaking battery Only genuine batteries offer the battery charge count feature informing you when the battery is reaching the end of its useful life. -
Page 6: Packing List
Packing List • HX446E Transceiver with stubby or high efficiency whip antenna • CNB450E Rechargeable 1800mAh Li-Ion battery • CBH450 Spring loaded belt clip • CSAHX Dual slot intelligent rapid charger Optional Accessories • UG446X User guide Battery & Charger Options... -
Page 7: Preparing Your Radio For Use
Bluetooth double earpiece headband defender headset with boom mic and ear cup PTT * VOX = Voice Operated Transmit (hands free operation) For complete up to date list of optional accessories visit www.entel.co.uk Preparing your radio for use Attaching / Removing the Battery... - Page 8 Preparing Your Radio For Use cont... Attaching / Removing Audio Accessories To attach, remove the accessory cover by unscrewing the locking screw anti-clock- wise (store the cover in a safe place). At- tach accessory plug by locating the peg on top of the plug into the slot of the radio’s socket.
-
Page 9: Hx446E
HX446E Standard Features: • 16 programmable channel positions (8 RF frequencies) • Full transmit power output 0.5 watts • 1800mAH Lithium-Ion battery for superior operational time • CTCSS & DCS (Analogue & Digital squelch) with squelch tail elimination (removes the ‘shh’ noise) •... -
Page 10: Contols & Indicators
Controls & Indicators Channel select Antenna control On / Off / volume control Function button 3 & LED indicator Push To Talk Speaker (PTT) switch Function button 1 Microphone Function button 2 On / Off / volume control. Rotate clockwise to turn on and increase volume, anticlockwise to reduce volume and turn off. -
Page 11: Using Your Radio 10
Turn your radio on using the on / off volume control on the top of the radio. The radio will “beep” and the LED will briefly illuminate yellow. (The beep may be disabled if required by your Entel approved dealer). - Page 12 To enable / disable the VOX feature press the bottom side function button below the PTT button for 1 second. For a list of VOX compatible audio accessories see page 5 of this guide / contact your dealer or visit www.entel.co.uk...
-
Page 13: Programming Your Radio 12
Programming your radio The radio’s frequency and tone configuration can be changed in user programming mode.This will allow you to put any of the standard frequencies or tones in to any channel position.When a radio has been configured this information can be quickly and easily cloned into other units using an op- tional cloning cable.The programming process is confirmed using a series of audible beep tone patterns. - Page 14 Check / Modify CTCSS/DCS Tone Checking the current configuration • To turn off CTCSS/DCS tone on a channel, enter tone programming mode, press the PTT • A momentary press of the bottom side button without selecting a tone. function button will cause the radio to beep •...
-
Page 15: Cloning Your Radio
Radio Cloning Radio cloning allows you to copy the programmed channel and button setup information from a ‘master’ radio into other unprogrammed radios without the use of a PC. Cloning is performed by connecting two radios together using a HXCL cloning lead. How to clone a radio Connect the HXCL lead to the accessory socket on both radios. -
Page 16: Frequency & Tone Table 15
Frequency Table Frequency Beeps • 446.00625 MHz • • 446.01875 MHz • • • 446.03125 MHz • • • • 446.04375 MHz • • • • • 446.05625 MHz • • • • • • 446.06875 MHz • • • • • • • 446.08125 MHz •... - Page 17 DCS Tone Table Ref DCS Beeps Ref DCS Beeps ▬ ▬ ▬ ▬ ●●● ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ●●●●● ▬ ▬ ▬ ▬ ●●●● ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ●●●●●● ▬ ▬ ▬ ▬ ●●●●● ▬...
-
Page 18: Default Channel Configuration
Default Channel Configuration The HT446 hand portable radio has been factory programmed with the default frequencies in the table below. This configuration may offer compatibility with other brands of PMR446 radio but can be altered by your dealer to match any existing PMR446 equipment. Ch. -
Page 19: Troubleshooting Guide
Incompatible accessory Replace with genuine accessory Radio emits constant tone Incompatible battery fitted Replace with genuine Entel battery when switching on Radio emits 5 short beep tones Battery has used almost all Prepare to replace battery when switched on... - Page 20 ‘the professional’s choice’ <Intended Country Of Use> Registered Community Design 832340 Copyright and Unregistered Design Right Entel UK 2007 All rights reserved...