Configuration - Avaya 8600 Engineering

avaya.com

2.1 Configuration

For this configuration example, 8600-1 will be configured using ACLI while 8600-2 will be configured
using PPCLI.
2.1.1 Set Spanning Tree Mode to RSTP
ERS8600-1: Step 1 – Set the bootconfig Spanning Tree mode to RSTP
ERS-8610:5(config)# boot config flags spanning-tree-mode rstp
ERS-8610:5(config)# save bootconfig
ERS-8610:5(config)# boot –y
|
ERS-8610:5(config)#sys name ERS8600-1
ERS8600-2: Step 1 – Set the bootconfig Spanning Tree mode to RSTP
ERS-8610:5# config bootconfig flags spanning-tree-mode rstp
ERS-8610:5# save bootconfig
ERS-8610:5# boot –y
|
ERS-8610:5# config sys set name ERS8600-2
ERS4550T-1: Step 1 – Set Spanning Tree Operation mode to RSTP
4550T(config)# spanning-tree op-mode rstp
4550T(config)# write memory
4550T(config)# boot
Reboot the unit(s) (y/n) ? y
|
4550T(config)# snmp-server name 4550T-1
4550T-1(config)# banner disabled
ERS4528GT-2: Step 1 – Set Spanning Tree Operation mode to RSTP
4548GT#(config)# spanning-tree op-mode rstp
4548GT#(config)# write memory
4548GT#(config)# boot
Reboot the unit(s) (y/n) ? y
|
4548GT(config)# snmp-server name 4548GT-2
4548GT(config)# banner disabled
RSTP/MSTP Technical Configuration Guide
18
July 2010