Mechanical Disassembly; Mechanical Disassembly Flow Chart - Sanyo PDG-DHT100L Service Manual

Mechanical Disassembly

Mechanical disassembly flow chart

Mechanical disassembly should be made by following procedures chart.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the origi-
nal otherwise it may cause loss of performance and product safety.
The wiring method of the leads and ferrite cores should be returned exactly the
same state as the original, otherwise it may cause lose of performance and
product safety.
1 Projection lens removal
2 cabinet top removal
3 Main and control boards removal
4 AV, Mother and Led light boards removal
5 Lamps and color wheels removal
6 optical base assy and Power(dc) board removal
6-1 optical base assy disassembly
7 cabinet front assy removal
r/c1, Led boards removal
8 Lens holder and optical unit assy removal
8-1 Shutter assy removal
8-2 Formatter board assy removal
8-3 dynamic black unit removal
8-4 optical unit disassembly-1
8-5 optical unit disassembly-2
9 optical lamp cover assy removal
10 Ballast assy and Filter duct assy removal
10-1 Ballast assy disassembly
10-2 Filter duct assy disassembly
11 r/c2 and Ac box assy removal
12 Lamp duct box assy removal
13 Power(Ac) and PFc board removal
-1-
Screws Expression
(Type ) mm
Diameter x Length
T type M Type