Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.
z Cabinet Top & R/C Board removal
1. Remove 6 screws A (M3x8) to remove the Cabinet top.
. Remove the R/C board and Control Buttons.
R/C Board
A
Control
Buttons
A
A
A
-10-
Screws Expression
(Type
Diameter x Length
T type
Cabinet Top
A (M3x8)x6
A
) mm
M Type
Fig.1