Table of Contents
Advertisement
Modulation Through a Multiple
This patch adds a second effects module and a split LFO (low frequency oscillator) signal
to the basic "Patching a Module" patch. This patch uses the multiple to allow an LFO to
modulate two parameters at the same time.
Just like the previous example, second effects module is patched between the output of
the Filter and the
OUT jack of the Patch Box. An LFO triangle waveform output is patched
into the Multiple. A second patch cable is patched from the Multiple into the Frequency CV
input of the Filter. The third output of the Multiple is patched into the Sample Rate CV
input of the Crush module.
This patch does not utilize the expression pedal inputs or
footswitches.
15
Advertisement
Table of Contents
