Pittsburgh Modular Patch Box Manual And Patch Manual page 11

Patching a Module
Patching a module between the preamp and the output is the basis of the Patch Box
functionality and the simplest patch that includes installed modules. Use a patch cable to
patch between one of the INPUTS and the input jack of an effects module. In the example
we have patched the INPUTS into the input jack of a Filter module. The output of the
Filter module is then patched into the OUT jack of the Patch Box. The signal then passes
through the OUTPUT level knob into the 1/4" output on the rear of the enclosure.
This patch does not utilize the expression pedal inputs or footswitches.
11