Using Your Machine - Vax LiFE User Manual

Using your machine

Operating your LiFE cordless vacuum
Plug charger into the
mains. Push battery firmly
into docking station. LED
indicator will illuminate
within 2 seconds if pushed
in correctly. Initial charge
should be for 10 hours.
Place your foot on the
floor head and pull the
handle backwards to
recline the machine.
CAUTION: When carpet mode is selected on the On/Off and brushbar control the brushbar will constantly rotate.
Never leave the vacuum cleaner in one spot for an extended period of time as this may damage the floor surface.
Vax cannot be held responsible for damage to the floor surface if the customer fails to take notice
of this recommendation.
The light will fade in and
out when fully charged.
To remove battery, lift
release flap while holding
the docking station.
Lift release flap and
pull battery to remove.
Before inserting the
battery make sure
On/Off and brushbar
control: on machine
is set to off.
O
On
On/Off switch:
0 Off
I Hard floor
II Carpets
It is normal for the LED to
flash/stay lit for up to 10
seconds after the battery
is removed. If it still flashes
after 10 seconds, unplug
docking station and wait 10
seconds before re-trying.