Connecting To A Computer - Sony DXC-390P Instructions For Use Manual

Connecting to a Computer

System for controlling the camera with a computer using an RS-232C
command
Set the MODE
1
selector to the
2
"1" position.
Equipotential ground
terminal (only for
CMA-D2MDCE)
CMA-D2CE*/
D2MDCE
camera
adaptor
CAMERA
(4-pin or 12-pin)
a) Use the shielded connecting cable for connecting to a computer.
For more details on RS-232C protocols and cables for connection to a
computer, contact your authorized Sony dealer.
* CMA-D2CE is intended for general purpose use. It is not intended for medical use.
DXC-390P
VIDEO OUT
DC IN/VBS
TRIG IN
LENS
MENU LOCK
OFF ON
RGB/SYNC REMOTE
DC IN/VBS
Power cord
CCDC-5/10/25/50A/100A cable
or
CCXC-12P02N/05N/10N/25N cable
Video input connector
VIDEO OUT
REMOTE
Serial interface
connector
a)
Connecting cable
Basic System Connection
Video monitor,
VCR, etc.
Computer
43