Connecting To A Computer Or A Network - Sony SNC-DF40N Installation Manual

Notes
• At first the lens may make idle turns
because of the slip mechanism.
When the lens stops, turn it in the same
direction (counterclockwise) again
and remove it from the camera.
• Be careful not to damage the lens plug
or cable when removing the lens.
3
Put a lens on the mounting position
and turn the lens clockwise. When the
lens stops, turn it again in the same
direction (clockwise) to fix the lens in
place.
4
Insert the lens plug.
16
GB

Connecting to a Computer or a Network

Connecting to a
Computer or a
Network
To connect to the computer, use a
commercially available network cable (cross
cable).
To connect to the network, use a
commercially available network cable
(straight cable).
Note
When you connect a connection cable like a
network cable to the connectors of the
camera, it may not be connected if its
connection part is too long. Prepare the cable
which suits to the connectors.