Tripp Lite SRCOOL12K Owner's Manual Addendum

Portable air conditioning unit

Low Temperature Operation

The SRCOOL12K is a high performance cooler, capable of producing very cold air output. When using the SRCOOL12K in environments that are

already cold (20° C / 68° F or less), Tripp Lite recommends using the Dehumidify Mode only. This will allow the unit to continue to provide the

supplemental cooling while preventing any evaporator icing issues caused by the low room temperature.

The Tripp Lite SRCOOL12K has the ability to continually monitor itself. Should an error occur, the display will show one of 5 error codes below:

Error Code

Description

Internal Communication Error

Indoor Temperature Sensor Error

Internal Temperature Sensor Error

Refrigerant Error

Water Full

Code E4 can be cleared by emptying the water tank. Consult the owner's manual for details.

1. Power cycle the unit by unplugging it from the source for 5 minutes.

2. Plug the unit back in.

3. Restart the unit.

If the code remains clear, continue to operate the unit as normal. If the code returns, please contact Tripp Lite for further instructions.

SRCOOL12K (120 V, 60 Hz)

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Table of Contents

Do you have a question about the SRCOOL12K and is the answer not in the manual?

Page 1 The SRCOOL12K is a high performance cooler, capable of producing very cold air output. When using the SRCOOL12K in environments that are already cold (20° C / 68° F or less), Tripp Lite recommends using the Dehumidify Mode only. This will allow the unit to continue to provide the supplemental cooling while preventing any evaporator icing issues caused by the low room temperature.
Page 2 Cuando use el SRCOOL12K en entornos la capacité de produire de l’air très froid à la sortie. Lorsque le que estén ya fríos (20° C / 68° F o menos), Tripp Lite recomienda SRCOOL12K est utilisé dans des environnements qui sont déjà...