Using Ca-Config Software - Calypso CA-500 User Manual

1.3

Using CA-Config Software

Once the unit is wired and powered up, CA Series configuration is managed entirely by CA-
Config software, which is provided on a CD with the unit. CA-Config software must be installed
on the PC connected to the CA-1000 unit via the serial programming cable. After launching the
software, select the appropriate serial port from the pull-down; it should automatically initiate
2
communications with the CA unit . Note that reselecting the serial port from the drop-down
menu re-initializes the application. CA-Config is a single-screen interface that provides all
settings and options with simple push buttons and pull-down menus.
2
Refer to section 1.1 for instructions on manually putting the unit into Program Mode.
Page 7