Calypso CA-1000 Quick Manual

Making Connections

It is the responsibility of the service technician to
correctly prepare cables of proper-size and
length when using the Phoenix connectors pro-
vided
.

NOTE: Connection illustrations listed below are
provided with highlighted (in blue) port views.
1
Plug-in the power supply jack into the 12VDC (3.5A) power
socket of the CA-1000.
2
Terminate the 5-pin Phoenix screw-down connector to the
CH1 series-socket (next to 12VDC power port).
3
Connect CH2 mini-audio jack to the CH2 port highlighted to
the left and as shown above.
4
Connect CH3 mini-audio jack to the CH3 port as shown
above.
www.calypsosystems.com
Making Connections
5
Power
Connect the 5-pin Phoenix connector to the speaker series-
socket.
6
Audio 1
Plug-in the headphones to the jack port as shown above.
7
Connect the 4-pin IR Input/Output connector to the 4-pin
Audio 2
socket as shown above.
8
Terminate the 2-pin Phoenix connector to the CH4+/CH4- (Bal)
series-socket as depicted above.
Audio 3
9
Terminate the 3-pin Phoenix connector to the 3-pin socket as
shown in the photo above.
Speakers
Head Phones
(optional)
IR Communication
(optional)
Audio 4
Serial Communication
07.01.09