Log; Call Waiting; Call Duration; Packet Data - Nokia N76-1 User Manual

with a still image captured by the camera in your device,
see 'Call', Image in video call, p. 103.
To end the video call, press

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings > Phone > Call >
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press
calls, select Options > End all

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
Log > Recent calls. The device registers missed and
received calls only if the network supports these functions,
the device is switched on, and within the network service
area.
.
Call waiting in Tools >
Call waiting (network service).
. The first call is put
Options >
. To end both
calls.
, and select Applications >
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press

Call duration

To monitor the approximate duration of your incoming
and outgoing calls, press
Log > Call duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See 'Phone and
SIM card', p. 100.

Packet data

To check the amount of data sent and received during
packet data connections, press
Applications > Log > Packet
be charged for your packet data connections by the
amount of data sent and received.
Options > Clear recent
.
, and select Applications >
Options > Clear
, and select
data. For example, you may
85