Push To Talk - Nokia N76-1 User Manual

Monitor all communication events
Icons in Log are as follows:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text messages, or data
connections registered by the device, press
Applications > Log, and press
log.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To add an unknown phone number from
contacts, select Options
To filter the log, select
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select
Clear log. Select Yes
from the log, press
To set the log duration, select
duration. If you select
calls register, and messaging delivery reports are
permanently deleted.
86
, select
to open the general
Log to your
> Save to Contacts.
Options > Filter and a filter.
Options
to confirm. To remove a single event
.
Options > Settings
No log, all the log contents, recent
Tip! In the details view, you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select
To view from the packet data counter how much data is
transferred and how long a certain packet data connection
lasts, scroll to an incoming or outgoing event indicated by
Pack., and select

Push to talk

Press , and select
Push to talk (PTT) (network service) is a real-time voice
over IP service implemented over a GSM/GPRS network.
Push to talk provides direct voice communication
connected with the push of a key. Use push to talk to have
a conversation with one person or with a group of people.
Before you can use push to talk, you must define the
push-to-talk access point and push-to-talk settings. You
may receive the settings in a special text message from the
service provider that offers the push-to-talk service. You
>
can also use the
configuration, if supported by your service provider.
In push-to-talk communication, one person talks while the
> Log
others listen through the built-in loudspeaker. Speakers
take turns responding to each other. Because only one
group member can talk at any time, the maximum duration
Options > Copy number.
Options > View details.
Tools > PTT.
Sett. wizard application for