Make Calls; Voice Calls - Nokia N76-1 User Manual

Make calls

Voice calls

1
In the standby mode, enter the phone number,
including the area code. To remove a number, press
For international calls, press
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2
Press to call the number.
3 Press to end the call (or to cancel the call
attempt). Pressing
another application is active. Closing the fold does not
end an active voice call.
To adjust the volume during a call, use the volume keys on
the side of your device. If you have set the volume to
Mute, select Unmute
To make a call from Contacts, press
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See 'Copy
contacts', p. 89.
78
twice for the +
always ends a call, even if
first.
, and select
.
To call a recently dialed number in the standby mode, press
. Scroll to the number, and press
To send an image or a video clip in a multimedia message
.
to the other participant of the call, select
MMS (in UMTS networks only). You can edit the message
and change the recipient before sending. Press
the file to a compatible device (network service).
To send DTMF tone strings (for example, a password),
select Options > Send
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press
send the tone. You can add DTMF tones to the
number or DTMF fields in a contact card.
To put an active voice call on hold while answering another
incoming call, select Options
the active and the held call, select
connect the active and held calls and drop yourself from
the line, select Options
Tip! When you have only one active voice call, to put
the call on hold, press
again.
During an active call, to route the sound from the handset
to the loudspeaker, select
.
Options
DTMF. Enter the DTMF string or
repeatedly. Select
Phone
> Hold. To switch between
Options > Swap. To
> Transfer.
. To activate the call, press
Activate loudspeaker. If you
> Send
to send
OK to