Installing Additional Hard Disk - BenQ Joybook P53 Series User Manual

Installing additional hard disk

You can install an additional hard disk in the Joybook. Before
you upgrade the hard disk, please check the BenQ web site to
determine the module which can be used, or contact BenQ
distributor or customer service center. It is recommended that
you take your Joybook to the BenQ distributor or customer
service center for the upgrade.
For details about the limit of maximum capacity, refer to the
product information from http://BenQ.com.
• Please have the provided hard disk bracket and 4 screws on
hand before you proceed with the installation.
• Please follow the steps below to consult the FAQ information
and find out the types of BenQ certified hard disks for your
Joybook:
1. Connect to BenQ Online Service and Support
(http://www.benq.com/support/).
2. Click Knowledge Base.
• This information is for installing a secondary hard disk only.
Removing the primary hard disk cover yourself will void the
warranty.
• It is the sole responsibility of the user if problems (such as
data loss and system failure) occurred due to non-factory
installed parts and/or non-original accessories.
54 Installing additional hard disk
1. Shut down your Joybook completely. Disconnect the AC
adapter and turn over your Joybook.
2. Slide the battery retainer B to the unlock
Battery retainer B
Battery
Secondary
Hard disk cover
position.