Connecting An External Monitor - Fujitsu LIFEBOOK U745 Operating Manual

Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the
DisplayPort or the DVI-D monitor port (see overview below). Screen output is limited to a maximum
of two screens at any one time (see
Monitorport Monitorport VGAconnection socket Monitor
Digital DisplayPort (on device and on optional
port replicator)
Digital DVI-D monitor port (only on optional port
replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the desired monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
Fujitsu
"Key combinations", Page
Analogue VGA monitor port (on device and on
optional port replicator)
"Key combinations", Page
Connecting external devices
24, section "Toggle output screen").
24.
53