Gree GVH48AH-M3DNA5A Service Manual page 64

Steps
13.Remove gas and liquid separator
Loosen the two screws used for fixing the gas
and liquid separator, pull it upward and then
remove the gas and liquid separator.
14.Remove compressor
Twist off the nuts used for fixing the compressor
withwrench, pull the compressor upward to
remove it.
15.Remove valve support electric expansion valve
gas valve and liquid valve
Unsolder the spot weld connecting capillary and
connecting pipe of liquid valve,remove 2 bolts fixing
the valve support with wrench.Remove 4 bolts
connecting gas and liquid valves,and valve
support and then remove the gas and liquid vales.
Twist off the screws used for fixing the , unsolder
the spot weld between
(notice: before soldering, the refrigerant should
be released completely), pull it outward and then
remove the electric expansion
Procedure
electric expansion valve
valve.
gas and liquid seperator
compressor
electric expansion valve
gas valve
valve support
liquid valve