Gree GVH48AH-M3DNA5A Service Manual page 63

S e t p s
10.Remove motor
Twist off the screws used for fixing the motor,
pull out the motor wire and pull it outward,then
remove the motor.
11.Remove four-way valve and air intake pipe
Release the refrigerant completely, unsolder the
air intake pipe of compressor, outlet pipe of
condenser, connecting pipe of gas valve and
gas and liquid separator, then pull the four-way
valve and air intake pipe.
12.Remove Discharge Tube
Discharge the refrigerant completely unsolder
the pipelines connecting the compressor and
the condenser assy.and then remove the
discharge tube.
(NOTE: Before unsoldering,please discharge
the refrigerant completely.When unsoldering
the soldering joint, wrap the gas valve with wet
cloth completely to avoid damage to the valve
caused by high temperature.
P o r c e d u e r
motor
four-way valve
Discharge Tube