Emergency Disarm Procedure; Installer Programmed Options - Code Alarm PC 7600 Owner's Manual

System Maintenance

Emergency Disarm Procedure

If your remote control is lost or fails to function, use this procedure to
disarm the PowerCode PC 7600
1. Use the keys to enter the vehicle.
The alarm will sound once the door is opened.
2. Insert the key into the ignition and turn to the ON position.
3. Locate and press the emergency override button.
The alarm will turn off and then you will be able to
start your vehicle.
Your Emergency Disarm Button is located:

Installer Programmed Options

Ignition On Door Lock
Ignition Off Door Unlock
Illuminated Entry/Exit
Siren/Horn Chirps
Passive Arming
Pasive Door Locks
Car start Run Time
Car Start Button Single button 2-button start
Light/AUX1 Output Duration _____________________
Defrost/AUX2 Output Duration _____________________
Window Up/AUX3 Output Duration _____________________
Window Down/AUX4 Output Duration _____________________
(cont.)
TM
and start your vehicle.
ON
ON
ON
ON
ON
ON
12 min.
OFF
OFF
OFF
OFF
OFF
OFF
25 min.
11