Wind Bobbin Thread - IKEA SY Manual

Wind bobbin thread

1. Pull out the hand wheel.
2. Unwind some of the thread and feed it through the top thread guide and
round the bobbin winding thread guide.
3. Feed the thread through one of the holes in the bobbin, from the inside
to the outside, and then put the bobbin onto the bobbin winder.
4. Slide the bobbin winder to the right, against the bobbin stop.
5. Keep hold of the loose end of the thread. Press the foot control. When
the thread is secured, let go of the end. Release the foot control when the
bobbin is fully wound.
6. Push in the hand wheel to its original position and slide the bobbin
winder back to the left. Cut off the thread.
5
L M
J K
H I
E F G
C D
A B
1
3
6
H I
E F G
C D
A B
2
L M
J K
H I
E F G
C D
A B
4
L M
J K
ENGLISH
11