Table of Contents
Advertisement
3e-522AW Wireless Access Point
On this screen, if not using DHCP to get an IP address, input the
information that the Access Point requires in order to allow the wireless
devices it controls access to the wired LAN. This will be the IP address,
Subnet Mask, Default Gateway, and, where needed, DNS 1 and 2. The
LAN administrator for the wired LAN has this information.
Setup —Bridge
The Setup - Bridge screen contains data that may be needed when
troubleshooting the 3e-522AW. Normally, do not change the default
configuration on this page unless instructed by the manufacturer for
troubleshooting purposes.
12
Advertisement
Table of Contents
