Table of Contents
Advertisement
You will be asked for your User Name and Password. The default is
User = "admin" and password = "admin."
Setup—General: You will immediately be directed to the Setup-
General page for the 3e-522AW Wireless Access Point.
This screen lists the firmware Version number for your 3e-522AW
and allows you to set the Host Name and Domain Name as well as
establish system date and time. (Host and Domain Names are both set at
the factory for "default" but can optionally be assigned a unique name
for each.) When you are satisfied with your changes, click Apply.
Setup — WAN: Next, click the entry on the left hand navigation
panel for Setup -WAN. You will be directed to the Setup – WAN page.
Chapter 3: Access Point Internal Management Functions
11
Advertisement
Table of Contents
