The Heat Setting; Switching The Power Function On And Off - AEG HC452400EB User Manual

66
Operating instructions

The heat setting

Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.
The automatic heat up
Automatic heat up function sets the high-
est heat setting (not
and then decreases to the necessary level.
To start function touch the symbol
than set necessary heat setting.
on when the cooking zone operates on
highest heat setting.
To stop the function change heat setting.

Switching the Power function on and off

The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After that the induction cooking zone auto-
matically switches back to heat setting 14. To switch on, touch
off, touch a heat setting
Bridge function
The Bridge function connects two cooking zones and they operate as one.
First set the heat setting for one of the cooking zone.
To start the Bridge function touch
control bars.
To stop the Bridge function touch
) for some time,
and
comes
- .
. To set or change the heat setting touch one of the
. The cooking zones operate independently.
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
, comes on. To switch