Sony SRPC-5 Operation Manual page 22

To delete a directory
Click the top box of the RMDIR / RENAME field,
select the directory you want to delete, and click the
RMDIR button.
5
Configure the following items in the DISK
CONTROL screen.
Underlined values in the table indicate default settings.
Item Function/settings
NAME SRC Specify the method in which imported
files are named.
Original: Uses the original file names
Manual: Renames the files during
BASE NAME When Manual is selected for NAME
SRC, this specifies the portion of the
name that will be common in all the file
names.
+SubID check box: Select this to add
Note
Select the "+SubID" check box when
importing multiple files of the same
name to the same directory.
REEL DIR Selects whether to create a directory
named after the SRMemory card ID
when storing the file.
disable: A directory named after the
SRMemory ID: Creates a directory
Reel Name: Creates a directory
Original Dir: Uses the original
DELIMITTER Specifies the delimiter to be used
between the file name specified in
BASE NAME and the serial number.
You can select underbars (_), periods
(.), or hyphens (-). The default setting
is a period.
22
Basic Operations
that are stored on the SRMemory
card.
import.
When "Manual" is selected, the
FILE NAME field appears under
NAME SRC. A sample file name
based on the settings you specify
will appear in this field.
sub IDs (for identifying clips) to
the file names. The sub ID is a
serial number that increases
sequentially by 1 with each file
imported.
SRMemory card ID is not created.
The file will be saved directly
under the specified directory.
named after the SRMemory card
ID.
named after the reel name.
directory names that are stored
on the SRMemory card.
Item Function/settings
IMPORT LOG Specifies the import log file setting.
disable: An import log file is not
created.
enable(Log Dir): An import log file will
be saved in the log directory.
enable(Selected Dir): An import log
file will be saved directly under the
directory you specify.
+FCP check box: Select this to
generate Final Cut Pro 7 format
XML files.
To view the created import log file,
click the Import LOG button at the
bottom right of the DISK CONTROL
tab.
For details on import log files, see
"Import log display" on page 23.
For details on managing import log
files, see "Managing Log Files" on
page 34.
COMMENT Enter comments to be included in the
import log file.
6
Click the MEM CONTROL tab.
The MEM CONTROL tab screen appears.
7
Select the check boxes for the files to be imported, and
click the "Add" button.
The selected files are added to the CLIP LIST.
If you click the proxy screen, the file that appears in
the screen will be added directly to the CLIP LIST.
When you click the check box, the first image of that
file is displayed.
If you double-click a check box while pressing the
Shift key, all the check boxes will be selected. If you
double-click a check box while pressing the Ctrl key,
all the check boxes will be cleared.
You can only set the IN/OUT points and DURATION
for files playable in the format set in SYSTEM
FORMAT. Files are added to the CLIP LIST when
you double-click the GUI proxy after setup.
8
Click the START button in the IMPORT area.
File import starts.
During file import, the transfer status is indicated by a
progress bar and percentage in the DISK field.
Action when errors occur
You can specify the action to be taken if an error
occurs during import.
Underlined values in the table indicate default settings.