Figure 4-9: Available Wireless Networks; Figure 4-10: Network Settings - Linksys WMP300N User Manual

Wireless-N PCI Adapter
Advanced Setup
If your network is not listed with the available networks, you can use Advanced Setup.
1. Click Advanced Setup on the Available Wireless Network screen to set up the Adapter manually.
2. The Network Settings screen from the Wireless Network Monitor will appear. If your network has a router or
other DHCP server, click the Obtain network settings automatically (DHCP) radio button.
If your network does not have a DHCP server or router, click the Specify network settings radio button.
Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You
must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and
DNS addresses, leave these fields empty.
IP Address - This IP Address must be unique to your network.
Subnet Mask - The Adapter's Subnet Mask must be the same as your wired network's Subnet Mask.
Default Gateway - Enter the IP address of your network's Gateway here.
DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here.
Click the Next button to continue, or click the Back button to return to the previous screen.
Chapter 4: Setting up and Connecting the Wireless-N PCI Adapter
Setting up the Adapter

Figure 4-9: Available Wireless Networks

Figure 4-10: Network Settings

10