Installation 1� The PCI Adapter is installed and set up using the Setup Wizard that is on the enclosed Setup Wizard CD. This Quick Installation is for Windows Vista users only. If you have Windows XP or 2000, use the other enclosed Quick Installation. IMPORTANT: Do not install the Adapter in your PC until you are instructed to do so or the Adapter will not install correctly.
Page 3
Read the License Agreement and click Next to continue the installation. Power off your PC. After installing the Adapter, as shown below, and restarting your PC, the Setup Wizard will continue. Open your PC case and locate an available PCI slot on the motherboard.
Page 4
After you install the Adapter correctly, the Congratulations screen appears. Click Finish. The first Windows Vista Wireless Network Configuration utility screen appears. Select your network, then click Connect. If your network has no wireless security, this screen appears. If your network has wireless security, go to step H.
Page 5
This screen appears while the Adapter connects to your network. Do not cancel, unless you want to end the installation. This screen appears when you are connected to your network. Select Save this Network, if you want to save your settings. Click Close.