Table of Contents
Advertisement
than enabling the BarkLimiter feature from
the handheld device.
NOTE: When using the device in this
mode, the radio signal is disabled and you
cannot control the dog collar device with
the handheld device.
1
On the dog collar device, hold the
power key until the LED flashes blue.
2
To return to training mode, turn off the
dog collar device and turn it back on in
training mode (page 4).
Bark Odometer
™
When you turn off the dog collar device in
independent BarkLimiter mode, the LED
flashes red and green to report the
number of times the device detected a
bark since it was last turned on. This can
help you track your dog's barking
behavior.
Red flash
Green flash
For example, one red flash followed by
four green flashes indicates the device
detected 14 barks.
Zero flashes indicates the device detected
zero barks.
10
Using the Light
You can use the light feature on your
device to verify pairing, help locate your
dog, and provide safety for your dog at
night.
1
2
3
4
Handheld Device
Specifications
Battery type
Battery life
Operating
temperature range
10 barks
Charging
temperature range
1 bark
Storage
temperature range
(up to 1 mo.)
Select a dog collar device (page 5).
Set the dial to AUX.
Select to turn the light on.
Select to turn the light off.
Device Information
Rechargeable lithium-ion
Up to 60 hr. of typical use
From -20° to 60°C (from
-4° to 140°F)
From 0° to 40°C (from
32° to 104°F)
From -20° to 50°C (from
-4° to 122°F)
Device Information
Hide quick links:
Advertisement
Table of Contents
