Linksys PAP2 Quick Start Manual page 2

4. After you complete the settings above, click "Save Settings" to save and then reboot your PAP2
device.
Note: LINKSYS PAP2 device provides two RJ11 FXS ports (Line 1, 2). If you need to use Line 2
port, please follow the same steps above to configure the settings of Line 2.
C. Make Device to Phone Calls
You can make long-distance or international calls to any country covered by Fratelecom's ITSP service.
Make a call to U.S.:
[U.S. country code]+[U.S. area code]+[U.S. telephone number]
1
Make a call to Taiwan:
[Taiwan country code]+ [Taiwan area code]+[Taiwan telephone number]
886
D. Check Your ITSP Account Balance
You may check your account balance right from your device. Fratelecom ITSP Service provides an IVR
(Interactive Voice Response) system to prompt you the real-time balance. Please follow the steps below
to check your balance.
1. Make sure your Linksys PAP2 is connected to the Internet.
2. Pick up the telephone handset connected to your Linksys PAP2.
3. Press " *88# " from the dial pad. You will be prompted the balance of your ITSP account.
If your account balance is zero, please contact
909 5551234
2
castrolufo@fratelecom.info
2
88881234