Philips L7.3A Service Manual page 41

...installing the tv
Manual
This menu enables you to search and store
CHILD LOCK B
every available channel manually.
SURF A/CH
INSTALLATION B
1. Call up 1st level menu with the
BRIGHTNESS 44
COLOUR 28
2. Scroll up with the
INSTALLATION.
SWAP B
SKIP B
MANUAL B
3. Select INSTALLATION with the
key.
4. Scroll down with the
light MANUAL .
SYSTEM AUTO
SEARCH VHF1B
5. Select MANUAL with the
FINE TUNE
6. Scroll down with the
light SEARCH.
SYSTEM AUTO
SEARCH VHF1B
FINE TUNE
7. Select the band (UHF, VHF1 or VHF3)
CHANNEL 6
with the key.
SYSTEM AUTO
8. Press the key to start searching.
SEARCH VHF1B
FINE TUNE
Searching stops once a channel is
CHANNEL 6
available. If you decide to store the
STORE B
channel, proceed to the next step. If not,
press the key to start searching
SEARCH VHF1B
FINE TUNE again.
CHANNEL 4
STORE B
9. If you wish to fine tune the channel,
scroll down to highlight FINE TUNE.
Press the or
FINE TUNE
CHANNEL 4
STORE B
10. Scroll down with the
light CHANNEL and assign a channel
number to the channel that you found.
FINE TUNE
CHANNEL 4
11. Scroll down with the
STORED
light STORE and press the
to store the channel.
OSD
12. Exit with the
13
MENU
key.
key to highlight
or
key to high-
or key.
key to high-
key to fine tune.
key to high-
key to high-
or key
key.
...installing the tv
How to deal with poor picture reception
You can use these 3 ways to deal with poor picture reception of your TV
• Skip channels
• System selection (for multi and dual system sets only)
• Fine tuning
Do the following steps to go into INSTALLATION menu.
MENU
1. Call up 1st level menu with the key.
2. Scroll up with the key to highlight INSTALLATION.
3. Select INSTALLATION with the or key.
CHILD LOCK B
SURF A/CH
INSTALLATION B
BRIGHTNESS 44
COLOUR 28
Skip channels
This menu enables you to skip channels
which have bad reception or channels
AUTO STORE B
SWAP B
which you do not watched often. Once a
SKIP B
channel is skipped, you will not be able to
MANUAL B
select it with the
1. Scroll down with the
highlight SKIP.
CHANNEL 6
SKIP NO
2. Select with the
CHANNEL is highlighted.
CHANNEL 6 3. Enter a channel number.
SKIP NO
4. Scroll down with the
highlight SKIP.
CHANNEL 6
5. Select YES with the
SKIP YES
CHANNEL DELETED appears to
CHANNEL DELETED
confirm that the channel is skipped.
To unskip channels, repeat step 3 to 5 but
select NO instead of YES.
OSD
6. Exit with the
14
CH
or keys.
CH
key to
or key.
key to
or key.
key.