Driver Gain; High / Low Shelf Eqs; Bass Eq Section; Led Dim - Adam S6X Operation Manual

4. Speaker Adjustment

4.4

Driver Gain

Whereas the 'Input Gain' raises or lowers the
overall input sensitivity up to +/-10 dB, the
'Driver Gains' work only within the corresponding
frequency range, raising or lowering from +/-2 to
+/-6 dB.
4.5

High / Low Shelf EQs

The other two controls operate in a different
manner. The 'High' and 'Low' controls are shelving
filters that progressively lower or raise frequencies
below 150 Hz / above 6 kHz up to 6 dB (see Fig.).
Room EQ <150 Hz for low
frequencies below 150 Hz
4.6

Bass EQ Section

There are three fully parametric EQs (20 Hz to 200
Hz) that can be used to combat standing waves
in the control room. The EQs can be bypassed
individually or as a group so that their overall
effect can be analyzed in direct comparison to the
unaffected signal.
4.7

LED Dim

All LED indicators can be dimmed if necessary by
pressing the 'LED Dim'- button.
10
Room EQ >6 kHz for high
frequencies above 6 kHz