Input Gain - Adam S1A Manual

The Back Panel Controls allow the speaker to be adapted to different listening and
room requirements. There are controls for:

INPUT GAIN

HIGH GAIN
Room EQ >6 kHz
Room EQ <150 Hz Shelve Filter with 150 Hz cut off frequency
We deliver the speakers with all controls set to the fl at position.
INPUT GAIN:
To adapt to different signal levels, the voltage that is needed to drive the unit to its
maximum SPL (sound pressure level), is variable in a ±10 dB range:
The Back Panel
(Input sensitivity) ±10 dB, 0 dB for medium sensitivity
(Tweeter gain) ±4 dB, 0 dB for fl at response
Shelve Filter with 6 kHz cut off frequency
Manual S1A - page 4 of 12