Specifications - Black Box AC1000A User Manual

Cable Required:
Compliance:
Video Support:
Resolution and
Refresh Rate:
Transmission:
Required Source
Impedance:
Required Destination
Impedance:
Bandwidth:
Maximum
Differential
Input and Output:
Differential
Insertion Loss:
Audio
Characteristics:

1. Specifications

Between transmitter and receiver(s): Category 5 shielded or
unshielded twisted pair (STP or UTP), though STP is
virtually never necessary
CE; FCC Class A, IC Class/classe A
VGA, SVGA, XGA, XGA-2, RGBHV, RGB
At 450 ft. (137.2 m) or less: Up to 1280 x 1024 at up to 75 Hz;
At 400 ft. (121.9 m) or less: Up to 1600 x 1280 at up to 75 Hz;
See the Maximum Distance specification
Transparent to users (automatic, no delay)
Video OUT: 75 ohms;
Audio models: Audio OUT (if any): 600 ohms maximum
Video IN: 75 ohms;
Audio models: Audio IN (if any): 600 ohms minimum
Video (3 dB): DC to 8 MHz
Video: 0.55 volts peak-to-peak;
Audio: 0.5 volts peak-to-peak
Video: 0 dB maximum at 4 MHz;
Audio: 1 dB maximum at 1 MHz
AC1000A–AC1003A only:
Channels: Monaural (mono);
Bandwidth (+1 to -3 dB maximum): 20 Hz to 30 kHz,
measured at 1 volt RMS with 400 ft. (121.9 m) of CAT5
cable between transmitter and receiver
CHAPTER 1: Specifications
5