Package Contents; Equipment You May Also Need; Compatible Cabling - Black Box AC1000A User Manual

All models support refresh rates/resolutions up to 1280 x 1024 @ 75 Hz at up to
450 feet (137.2 m) and 1600 x 1280 @ 75 Hz up to 400 feet (121.9 m).
This equipment is not intended for, nor does it support, distribution
through an Ethernet network. Do not connect these devices to any sort
of networking or telecommunications equipment!

2.2 Package Contents

You should have received the following when ordering a CAT5 Multi VGA System
transmitter or receiver:
• The transmitter or receiver.
• External power supply (100–250 VAC, 50–60 Hz, autosensing) with cord.
• This manual (transmitters only).

2.3 Equipment You May Also Need

• Rackmount Brackets:
For single-port transmitters or single-port/dual daisychainable receivers:
AC1008 for 1 unit; AC1009 for 4 units; AC1010 for 8 units;
For quad hub transmitters: AC1011 for 3 units; AC1012 for 6 units.
• Audio cable with RCA jacks.
• Video cable with HD15 connectors.
• Serial cable with DB9 connectors.
• CAT5 cable.
• For the single-port audio models, an audio splitter.

2.4 Compatible Cabling

CAT5 cabling for the CAT5 Multi VGA System must be pinned to the TIA-EIA
T568B wiring specification. We also highly recommend that all CAT5 cables
be pre-terminated and tested. Cables terminated on-site or in an existing
infrastructure should be tested before use to ensure compliance with the TIA-EIA
T568B specification. Using incorrectly terminated CAT5 cables can damage the
CAT5 Multi VGA System.
WARNING
CHAPTER 2: Introduction
9