Appendix D. Rackmounting Units - Black Box AC1000A User Manual

CAT5 MULTI VGA SYSTEM

Appendix D. Rackmounting Units

The Rackmount Kits include brackets for mounting a single transmitter, single
receiver, or a single dual daisychainable receiver. Figure D-1 shows the 1-Unit
Rackmount Bracket (AC1008), which can be used to mount a single CAT5 Multi
VGA System unit on a wall. Figure D-2 shows the 4-Unit Rackmount Bracket
(AC1009), which holds four units in a 19" x 1U rack.
Not shown are brackets for 8 units and brackets for quad hub transmitters. The 8-
Unit Rackmount Bracket (AC1010) holds the mounted units like the 4-Unit
Rackmount Bracket (AC1009) but is 2U high instead of 1U high, stacking 4 slots
directly above 4 slots. The 3-Unit Quad Hub Transmitter Bracket (AC1011) is like
the AC1009 but holds 3 units instead of 4 in a 19" wide x 1U high panel. The 6-
Unit Quad Hub Transmitter Bracket (AC1012) is like the AC1011 but occupies 2U
of space instead of 1U in a 19" rack, stacking 3 quad hub transmitters atop 3 quad
hub transmitters.
Support
brace mounts
between
rail and rack
10-32 x 1 ⁄
2
panhead screws
28
Figure D-1. Mounting with the AC1008 kit.
"L
4-40 x 3 ⁄ "L flathead screws
8
Figure D-2. Mounting with the AC1009 kit.
Support
brace mounts
between
rail and rack
10-32 x 1 ⁄ "L
2
panhead screws
(only one shown)