Table of Contents
Advertisement
8.6 National Country Requirements
NOTE: The sections below assume that the conditions detailed in
8.6.1 United States of America
The radio card is already approved under the requirements of the FCC.
End-product requirements with this module installed should include:
• FCC Part 15 (emissions class B)
Final product markings must include:
Contains an approved Radio Module
Model: LA-5137A2
FCC ID: H9PLA5137A2
Important Notes
1. Co-location
The FCC approval issued EXCLUDES co-location with any other transmitter.
If the LA-5137 is co-located with another transmitter (e.g., Bluetooth Module), the OEM integrator is
responsible for re-evaluating the end product and obtaining a separate FCC authorization.
Motorola recommends the use of an accredited laboratory to carry out the necessary tasks.
2. Portable Use
The FCC approval of the module covers 'mobile' use.
If the final product is used in a manner where the antenna is closer than 20cm from the user (portable
use), the OEM integrator is responsible for re-evaluating the end product and obtaining a separate FCC
authorization.
Motorola recommends the use of an accredited laboratory to carry out the necessary tasks.
3. Channels
For use in the USA, the OEM must limit the available channels from 1 to 11.
Integral Antenna
Section 8.1
are met.
External Antenna
Contains an approved Radio Module
Model: LA-5137C2
FCC ID: H9PLA5137C2
8-5
Regulatory
Advertisement
Table of Contents
