European Union - Motorola LA-5137 Integration Manual

8-6 LA-5137 Compact Flash Adapter Integration Guide
8.6.2 Canada
The radio part is already approved under the requirements of Industry Canada.
End-product requirements with this module installed should include:
• Canadian Interference-Causing Equipment Regulations (ICES-003).
If the final product is used in a manner where the antenna is closer than 20 cms from the user (portable use),
the OEM integrator is responsible for re-evaluating the end product and obtaining a separate IC approval.
Motorola recommends the use of an accredited Laboratory to carry out the necessary tasks.
Final product markings must include:
Contains an approved Radio Module
Model: LA-5137A2
IC: 1549D-LA5137A2

8.6.3 European Union

The radio part is already approved under the R&TTE Directive 99/5/EC.
The final product must comply with all applicable European Directives such as EMC and Product Safety.
Care should be taken as a product might fall under the scope of other directives or standards depending on
the type of product e.g. Medical Directive, Potentially Explosive Atmospheres etc.
End-product requirements with this module installed should include:
• EMC Tests (the applicable standard depends upon the intended operational environment)
• Electrical Safety Tests
EC Directives require integrators document their compliance activities in a Technical Construction File (TCF).
Motorola will supply a copy of the following items covering the LA-5137 Radio Card:
• Notified Body Opinion (used to demonstrate compliance under the R&TTE Directive for Radio, EMC and
Product Health and Safety)
• EU Declaration of Conformity
NOTE: The OEM will be required to issue a 'Declaration of Conformity' to cover the final product.
Final product markings must include:
Contains an approved Radio Module
Model: LA-5137A2
Integral Antenna
Integral Antenna
External Antenna
Contains an approved Radio Module
Model: LA-5137C2
IC: 1549D-LA5137C2
External Antenna
Contains an approved Radio Module
Model: LA-5137A2